 |
Release the center seat belt
anchor from the cushion by pushing the small button in the retainer clip. You do not need to remove the upholstery first, it is shown here removed for clarity.
|
|
 |
Here is a close up picture of the
button, a dab of white paint was added for clarity. |
|
 |
Here is the clip closed (button not pushed) The "clip" looks brown in this picture. |
|
 |
Here is the clip open (button pushed) See how the brown |
 |
After both
sections are upholstered and bolted together, re-attach the center seat belt anchor. Just push it it until it "clicks". It is not necessary to push the side button. PULL ON IT HARD... to make sure it is properly connected. |